Popular Accessories to fit Hoover
The attachments described on this page are not made by Hoover but are
designed to fit and work well on their products. Also available are
Popular Genuine Hoover Accessories which are
manufactured by Hoover. We suggest that you consider purchasing these
products to add more versatility to your Hoover vacuum cleaner.
The brushing action by the turbine driven revolving brush roll provides
deeper cleaning of your upholstered furniture and carpeted stairs.
Experience cleaning with the strong suction from your vacuum cleaner
combined with the brushing action of this turbine driven nozzle. It's much
more effective than using a small hand held vacuum cleaner. This quality
attachment is made in Germany. The hose inlet is standard 1 1/4" diameter
so it fits many USA brand vacuums like Hoover uprights, Panasonic power teams,
Electrolux, and Kenmore (Sears) canisters. This attachment will fit directly
on most Hoover upright hoses or wands. Since Hoover WindTunnel hoses are
oversized, you will need to use one wand between the WindTunnel hose and
this nozzle. It will not mate with Hoover canister
hoses since their attachments fit inside the hose and have a locking pin.
See the genuine Hoover Hand Turbine Nozzle
for use on Hoover canisters.
View Larger Photo
This 8-Pc. Mini Attachment Set is great for reaching into very small
areas of electronic equipment, car interiors, computers, etc. The small
30" long 1/2" hose is equipped with an adapter which attaches to your
existing hose. Two 3/8" mini wands mate with a very small crevice tool and
two sizes of dusting brushes. This attachment set is designed to fit many different brands of vacuum
cleaners. These include many USA brand vacuums like Eureka, Hoover
uprights, Panasonic, Electrolux, and Kenmore (Sears) plus any other vacuum
having standard 1 1/4" American standard size attachments. The attachment set
will fit directly on most Hoover upright hoses or wands and all Hoover
canisters with the enclosed adapter. Since Hoover WindTunnel hoses are
oversized, you will need to use one wand between the WindTunnel hose and
the miniature hose.
View Larger Photo
This generic Deluxe Floor Brush will fit Hoover
Uprights and Bagless Canisters where the floor brush fits over the wands.
It is 12" wide and 2.5" deep, having natural hair brush strips with long bristles
along the front and back edges of the nozzle. Wheels
on the sides between the brush strips carry the weight
and downward pressure on the nozzle, allowing the
bristles to glide on the floor without being flattened.
Notches in the front brush strip allow dirt to easily
enter the nozzle. The elbow pivots sideways like most
floor tools for cleaning under low furniture.
This is very similar in design to European floor
brushes but it is designed to fit all 1 1/4" USA
standard canister and upright wands. For the same
nozzle with the Hoover Duros and Maytag canisters, see the
Deluxe 12" Floor Brush (35mm).
If your attachments have pins and fit inside the wand,
see the Deluxe Hoover 12" Floor Brush with Pin.
View Larger Photo
This generic 35mm Floor Brush will fit the
Hoover Duro and Maytag canisters in their
S3590 series. It is 12" wide and 2.5" deep, having natural hair brush strips with long bristles
along the front and back edges of the nozzle. Wheels
on the sides between the brush strips carry the weight
and downward pressure on the nozzle, allowing the
bristles to glide on the floor without being flattened.
Notches in the front brush strip allow dirt to easily
enter the nozzle. The elbow pivots sideways like most
floor tools for cleaning under low furniture.
The wands and floor nozzles on the Hoover
canisters this floor brush fits typically fit over
the wand and have release buttons on them since they lock on. This nozzle simply
friction fits over the wand without a locking device.
For the same nozzle to fit Hoover uprights and bagless
canisters with the 1 1/4" USA size, see the
Deluxe 12" Floor Brush (1 1/4").
If your attachments have pins and fit inside the wand,
see the
Deluxe Hoover 12" Floor Brush with Pin.
View Larger Photo
This generic 35mm to 1 1/4" adapter will fit the
Hoover Duro and Maytag canisters in their
S3590 series to enable
the use of standard USA 1 1/4" attachments.
These include attachments on Shop-Vac, Eureka,
many Electrolux models and some Hoover uprights
plus various other USA brands.
The wands and floor nozzles on the Hoover
canisters this adapter fits typically fit over
the wand and have release
buttons on them since they lock on. This adapter simply
friction fits over the wand without a locking device.
This flexible extra long 24" Crevice Tool is designed for use on USA
standard 1 1/4" hoses and wands so it fits many vacuums like Hoover
uprights, Eureka uprights and canisters, Panasonic power teams,
Electrolux, and Kenmore (Sears) canisters. The unique construction
consists of a long soft vinyl center section with high impact ABS Plastics
ends, making it quite durable yet flexible. This crevice tool is great for
reaching under refrigerators, behind old fashioned radiators and other
hard-to-reach areas.
View Larger Photo
 |
